Machine-made hollow glass-magnesium panel (Type 50, 1150 type)
The machine-made hollow glass-magnesium panel is the machine-made tongue-and-groove panel whose core options include hollow glass-magnesium, Type 50, 1150 type. This model page is written with a stated thin-fact warning: the source material gives fewer independent facts for this model than for the other five model pages, so this page supplements the model facts only with listed machine-made general facts — face sheets, joints, applications, and the inquiry checklist — and it never invents a model-specific figure to fill the gap.
Diagram: core and joint arrangement as listed for this model. This is a diagram, not a photograph of a finished panel.
Evidence strip
- Brand established 31 October 2012, according to the company profile.
- Jihua Laboratory project: 40,000 m², sulfomagnesium panels, as listed in the source site's project listing.
- Guangzhou Quaker project: 35,000 m², magnesium-oxide rock wool panels and hollow magnesium-oxide panels, as listed in the source site's project listing.
- Dongpeng Changsha base: 50,000 m², stainless-steel magnesium-oxide cleanroom panels, as listed in the source site's project listing.
- Certificates available upon request. No certificate number or issuing body is stated on this site.
Send your core, size and room use — get a magnesium-panel selection reply
What this model is, and what is not claimed for it
This is a machine-made tongue-and-groove panel, continuously roll-formed, in which hollow glass-magnesium is one of the listed core options, alongside glass-magnesium rock wool, sulfomagnesium, rock wool, and other cores listed for the machine-made route. The core option matters: a buyer who asks for this model must state that the core required is hollow glass-magnesium, because the same 1150-type machine-made line can carry other cores, and a core option is not a model on its own.
The listed selling points for this model are fire protection, sound insulation, thermal insulation, and easy installation. Those four selling points are stated as listed selling points, without numerical performance claims attached to this model. No density, strength, thermal-conductivity, sound-insulation, or fire-rating figure is stated for this model, because the source material does not list such a figure for this sandwich panel model, and the standalone raw-board figures are stated on the magnesium oxide board page, as the product page lists them, and are never copied onto a sandwich-panel page.
The hollow core system behind this model is described on the board page: magnesium oxide, glass-fibre mesh, perlite, and non-toxic additives, with a hollow core structure that keeps the board light. That composition belongs to the board system, and it is repeated here only as the core-system description, not as a specification for this sandwich panel's thickness or performance.
Listed dimensions and joint
| Item | Listed value |
|---|---|
| Type | Type 50, machine-made, 1150 type |
| Core option | Hollow glass-magnesium, as listed among machine-made core options |
| Module | 1150 type |
| Thickness | 50 to 150 mm, custom production as listed |
| Joint | Tongue-and-groove installation |
| Selling points (as listed) | Fire protection, sound insulation, thermal insulation, easy installation |
The thickness statement for this model is a custom-production range of 50 to 150 mm, which is the machine-made thickness range, not a single stock thickness. The inquiry must therefore state the thickness required, rather than assuming a default. The width follows the 1150-type module, and the joint is the tongue-and-groove joint that defines the machine-made route.
A buyer who needs a non-standard width, embedded conduits, or pre-cut openings should compare the handmade hollow glass-magnesium panel instead, which offers the 300 to 1,180 mm width range and the handmade opening options. A buyer who needs a regular layout at the 1150 mm module with fast installation should compare this machine-made model first.
Machine-made general facts that frame this model
Machine-made panels in general, as described in the source material, use colour-coated or stainless-steel face sheets with different cores and high-strength adhesive, continuously roll-formed. That general description frames this model, but it does not add a model-specific figure: the face-sheet material for a given order, the colour, and the finish must still be confirmed at inquiry, from the standard colour range, for this model.
The machine-made route's general application is cleanroom walls and ceilings. For this hollow-core model, the room uses to state at inquiry are the same listed uses that frame the hollow board system: cleanrooms, wall partitions, ceilings, floor bases, and prefabricated buildings, with the room use stated explicitly, because a ceiling panel and a partition panel are not selected on the same questions.
Installation for this model is tongue-and-groove installation, which is the machine-made route's fast-installation joint. No installation speed figure is stated for this model. The site team should ask for the installation guide for this model at inquiry if it is needed, rather than relying on a general speed claim.
Selection and inquiry checklist for this model
State the core explicitly as hollow glass-magnesium, the thickness within the 50 to 150 mm custom-production range, the 1150-type module, and the tongue-and-groove joint. State the room use, and state whether the room's fire, sound-insulation, or thermal-insulation requirements need documentary evidence for this model, so the supplier can reply with the documents that actually cover this model rather than a general brochure.
If the documentary evidence for a requirement cannot be supplied for this model, that is a selection result, not a reason to substitute another model's figure. Choose a different model whose documents do cover the requirement, or confirm the requirement differently with the supplier, and record the answer in the inquiry.
Before ordering, confirm the minimum order quantity and lead time for this model. Certificates are available upon request; please ask for the certificate list for this model. Confirm the applicable humidity range for this model by inquiry, as no humidity figure is stated on this site.
Company: Foshan Lairun New Building Materials Co., Ltd.. Address: Nanhai National Eco-Industrial Park, Danzao Town, Nanhai District, Foshan, Guangdong, China. Phone: +86 13929918930. Email: [email protected]. Before ordering, confirm the minimum order quantity and lead time for this model. Certificates are available upon request. Please ask for the certificate list for the model you are selecting.